Step 1: Prepare the Blade

CAUTION

Never touch the tip of the knife.

Doing so may result in injury. The cutting performance of the blade will also be impaired.

Required items (included items)
BladeHolder Blade Pin
Blade Holder Blade Pin *1
*1 The pin is inserted into the holder.
Procedure
  1. If the pin has been removed from the blade holder, insert the pin into the blade holder.
    blade
  2. Turn the blade holder cap clockwise, and tighten it until it stops rotating.
    GS2_BladePrepare_1
  3. Insert the blade.
    GS2_BladePrepare_2
    IMPORTANT

    Cutting conditions, such as the cutting-in amount, cutting speed, blade force, etc., must be adjusted to match the material type.

    Make sure to carry out cutting tests with the material to be used, and adjust the cutting conditions.