Step 3: Performing Cutting

Send the cut data to the machine, and cut the material.

WARNING

Never touch the cutting carriage while output is in progress.

The cutting carriage moves at high speed. Coming into contact with the moving carriage may cause injury.

IMPORTANT If the material comes off or the machine operates abnormally, press [PAUSE] to cancel the output.

Lower the loading lever, take out the material, and perform the setup again from the beginning.

Procedure
  1. Click Send To VersaWorks.
    • When RIP and Print is selected

      The job is added to VersaWorks queue A with the specified cutting settings, and cutting output is performed.

    • When Do Nothing or RIP is selected

      The job is added to VersaWorks queue A with the specified cutting settings. Proceed to Step 2.

VersaWorks operation
  1. Check the job settings.
    Double-click the added job to change items such as the number of copies to print, the scaling, and the printing position. For details, refer to the VersaWorks Master Guide.
  2. Output the printing data.