Step 5: Cleaning the Inside of the Machine

Clean inside the machine with a dry cloth.

CAUTION

Use a dry cloth to clean the inside of the equipment.

Failure to do so may cause the components inside the equipment to degrade, which can lead to injury.

CAUTION

Be careful of the pointed portion inside the front cover.

There is a pointed portion inside the front cover. Exercise caution when cleaning.

Procedure
  1. Open the front cover.

    Hold the parts shown in the figure with both hands and open the cover.

    DWX-43W_main_10
  2. Follow the on-screen instructions to clean inside the machine, and then click Next.

    Clean carefully with a dry cloth. Carefully wipe around the spindle head and the rotary axis parts shown in gray in the following figure.

    Fluid and milling waste in these areas may affect milling results.

    CAUTION

    Be careful around milling waste.

    Sharp milling waste may become mixed. To avoid injury, exercise caution.

    MEMO The front cover window scratches easily, so do not wipe it off with a cloth.
    Inside the machine
    DWX-43W_cleaning_01
  3. When you have finished cleaning, close the front cover.
  4. When a message indicating that the operation is complete appears, click [Finish].