Step 3: Printing Tests and Normal Cleaning

Procedure
  1. Open the Utility window.
    Starting/Exiting Utility
  2. Click Check Nozzle Condition.
    BN-20A_UtilityNozzle
  3. Click Test Print.
    A test pattern is printed. Follow the on-screen instructions to check for nozzle drop-out.
    BN-20A_UtilityNozzle_01
    • Nozzle drop-out is present. -> Proceed to step 4.
    • No nozzle drop-out is present. -> Click Close to finish the procedure.
  4. Select the Normal Cleaning, and then click Go.
    Normal cleaning starts.
    BN-20A_UtilityNozzle_02
  5. Check for nozzle drop-out again.
    If the nozzle drop-out is not fixed, perform Normal Cleaning again. For information about Medium Cleaning and Powerful Cleaning, refer to the following topic.