Jump to main content
User's Manual
User's Manual
  • The Basics
  • Fully Utilizing the Machine
  • Maintenance
  • Troubleshooting Methods.
  • Appendix
INDEX
  1. Home
  2. The Basics
  3. Basic Operations
  4. Printing
  • The Basics
    • Basic Information
    • Basic Operations
      • Switching Power On and Off
      • Printing
        • Step 1: Loading Media
        • Step 2: Bidirectional Adjustment
        • Step 3: Printing Tests and Normal Cleaning
        • Step 4: Correcting the Media Feed
        • Step 5: Starting Print Output
      • Output-start Location
      • Stopping Print Output
  • Fully Utilizing the Machine
  • Maintenance
  • Troubleshooting Methods.
  • Appendix

Printing

This section describes operations when printing only.

Refer to Cutting / Printing and Cutting, Performing Printing and Cutting Separately.

  • Step 1: Loading Media
  • Step 2: Bidirectional Adjustment
  • Step 3: Printing Tests and Normal Cleaning
  • Step 4: Correcting the Media Feed
  • Step 5: Starting Print Output
  • The Basics
    • Basic Information
    • Basic Operations
      • Switching Power On and Off
      • Printing
        • Step 1: Loading Media
        • Step 2: Bidirectional Adjustment
        • Step 3: Printing Tests and Normal Cleaning
        • Step 4: Correcting the Media Feed
        • Step 5: Starting Print Output
      • Output-start Location
      • Stopping Print Output
  • Fully Utilizing the Machine
  • Maintenance
  • Troubleshooting Methods.
  • Appendix

Feedback

1 2 3 4 5
NO YES

Feedback

Thank you

FA03803/R2-230228

Copyright © 2021-2023 Roland DG Corporation  
https://www.rolanddg.com/

User's Manual