Layout
Configures the settings related to the printing area and job layout. The items that can be selected vary depending on the model.
| Item | Description | Refer to | ||
|---|---|---|---|---|
| Media Settings | Sets the media size. | |||
| Size | Selects the media type. | Setting the Size of the Material | ||
| Get Media Width | Information about the printable area is acquired from the printer and W is set automatically. On the flat-bed model, W and H are set automatically. | |||
| W | W is set manually. | |||
| H | H is set manually. | |||
| Workpiece Information Settings | With a cylindrical printer, this menu item is displayed in place of Media Settings. | Printing with a Cylindrical Printer | ||
| Dot Shape | Selects the data registered with Workpiece Information Management. | |||
| Scaling | These settings are used for printing with the job enlarged or reduced. Default value: 100% | Zooming In / Zooming Out | ||
| W | Enlarges or reduces the job to the specified size. Click | Changing the Ratio of the Image Width to Height | ||
| H | ||||
| Scale | Enlarges or reduces the job by the specified scaling factor. | |||
| Restore Original Ratio | Returns to the original ratio. The window for selecting the reference appears, so select Width or Height. | |||
| Reset ALL | Returns to the original ratio and size. | |||
| Fit to Media Size | Automatically enlarges or reduces the job to match the paper size set in Media Settings. The scaling factor changes depending on the job orientation specified with Orientation under Print Properties. The horizontal to vertical ratio cannot be changed. | |||
| Position | Sets the job printing position. | Setting the Printing Position | ||
| X | The job is moved by the specified offset in relation to the upper-left corner (origin) of the media in the preview image (the lower-right corner of the set media). X sets the right distance and Y sets the downward distance. | |||
| Y | ||||
| Center on the Media | When using roll media, the job is moved to the horizontal center of the media. When using sheet media or standard-size media, the job is moved to the horizontal and vertical center of the media. | |||
| Print Properties | Sets the number of copies to print, print spacing, image mirror, and printing direction. | |||
| Copy | Sets the number of copies to print. Default value: 1 | Setting the Number of Copies to Print | ||
| Page Range | Specifies the page to print when printing print data that is composed of multiple pages. | |||
| from | ||||
| to | ||||
| Tile Spacing | You can set the spacing between adjacent images when tiling and printing multiple images. Default value: Equal X and Y Spacing (Flat-bed model: Grid Spacing) | Setting the Spacing from the Adjacent Image | ||
| Equal X and Y Spacing | Specifies the spacing between adjacent images. The same value is specified for the vertical and horizontal spacings. | |||
| Separate X and Y Spacing | Specifies the spacing between adjacent images. Different values are specified for the vertical and horizontal spacings. | |||
| Grid Spacing | Specifies the value that is the addition of the image size and the spacing between adjacent images. The width and height values can be specified separately. | |||
| Spacing | Displayed when Equal X and Y Spacing is selected. Default value: 4 mm (0.16 in.) | |||
| X | Displayed when Separate X and Y Spacing is selected. | |||
| Y | ||||
| W | Displayed when Grid Spacing is selected. | |||
| H | ||||
| Mirror | Reverses the image when printing. This is set in cases such as printing on transparent media when the image will be viewed from the opposite side of the printed surface. | Mirroring the Image | ||
| Orientation | Specifies the direction of the printed image. Dark gray indicates a selectable direction, and the selected print direction is displayed in blue. | Rotating the Image | ||
| EPS | Sets the margins for data that contains cutting lines (cutting data). | |||
| Margin | ||||
to change the icon to 
and enable the changing of the ratio of the image width to height.