About Queue Properties and Settings

There are two printing settings when outputting print data. These are Queue Properties for configuring printing settings on the queue folder that contains the job and Settings for configuring printing settings on the selected job.

Basic usage

To start using the printer, the printing settings must be configured for the selected job under Settings. To apply the same number of copies or other printing settings to several jobs, you can set the settings (including the number of copies and media settings) to the input folder in advance using the printing settings under Queue Properties. After you configure the settings, enter the print data and apply the queue folder settings. Change each print data as necessary in Settings.

MEMO If Queue Properties settings were changed after Settings was performed, the settings are not applied to jobs that were already in the job list before the settings were changed. To apply them, click Copy/Paste Setting Value - Apply Current Queue Settings.

For example, after setting the number of copies to 3 in the job settings for print data "A," you set the number of copies to 2 in the queue folder for that print data. In this case, printing print data "A" will result in 3 copies being printed. To apply the queue folder settings set later (number of copies 2) to print data A, right-click print data A and perform Copy/Paste Setting Value - Apply Current Queue Settings.

List of printing setting icons

MEMO
  • The name is displayed below each icon. The icon names can be hidden.
  • The items which can be selected vary depending on the selected printer.
IconNameOverview
VW7-ICON_LayoutLayout

Configures the settings related to the media settings, printing area, and job layout.

VW7-ICON_QualityQuality

Sets the job quality and generates and adjusts spot color plates.

VW7-ICON_ColorSettingColor Management

Configures color settings, level adjustment, and printer color match settings.

VW7-ICON_ColorReplacementColor Replacement

Applies the nearest color finder and configures named spot color and value-specified special color settings.

VW7-ICON_MarkMark

Sets the details when marks, job information, and color bars are added to and printed with the job.

VW7-ICON_PrinterControlPrinter Controls

Configures the printer control settings.

VW7-ICON_CutControlCut Controls

Configures the settings for the cutting operation and control method.

VW7-ICON_JobManagementJob Management

Configures job processing.

VW7-ICON_CripandTileClip and Tile

Configures the settings for image clipping, dividing, and overlap width.

VW7-ICON_VariablePrintVariable Data

Sets variable printing in which images and text are replaced to print different images and text on each page.

VW7-ICON_JobCustomizeCustomize

Configures the settings for showing/hiding the printing setting tabs and tab names.