When Using CorelDRAW

This section explains how to register a color system library color in CorelDRAW.
MEMO The following procedure corresponds to CorelDRAW version 24.3.0.571.

The procedure may vary depending on the version of this software. For details, see the official CorelDRAW website.

Procedure
Register in the swatch library the spot color to use for cutting lines.
  1. On the RIP server (the computer on which VersaWorks has been installed), open the folder [C:\Program Files\VersaWorks\Swatch\CorelDRAW].
  2. Copy the "userinks.xml" file to the desired location.
    If the target computer is not the RIP server, use the network or a piece of external media (such as a USB memory device or a floppy disk) to copy this file.
Create cutting data, which includes the cutting lines.
  1. Create the illustration data.
  2. On the menu in CorelDRAW, click Window - Color Palettes - Palettes.
    The Palettes window appears.
  3. Click Corel DRAW3 under the drop-down list.
  4. Select the "userinks.xml" file that you copied in step 2, and then click Open.
  5. Delete the "userinks.xml" file that you copied in step 2.
  6. Select only the path that you want to make into a cutting line, and then select the Outline Pen.
    The Outline Pen window appears.
  7. Click 2023-04-21 13-22-24 to the right of Color, and then select Corel DRAWパレット.
    The Color Palette window appears.
  8. Select "Roland VersaWorks Dual.xml" from the drop-down list.
  9. Select one of the following palettes.
    • Cut: CutContour
    • Perforated Cut: PerfCutContour
    The color of the specified path changes to match the selected cut.
  10. Close the Outline Pen window.
  11. Click File - Export to save the file in EPS format.
    Add the saved file to the job list and execute cutting to cut the media along the path drawn with the above procedure.