Printing Job Information

The model name and serial number of the printer that was used, as well as the job name, are printed below the printed item. The following items can also be added. The printing size can be checked in the layout area in the Job Settings window.

File Name Print data file name
Layout Number of copies and scale
Quality Settings Current quality settings
Color Settings Details of the Color Settings
Printer Color Match Information of the color match between the reference color and the target color
File Format Settings of the spot colors and special colors (only when the conversion is enabled)
Device Controls Feed calibration (only when Use Printer Settings is not selected)
Job Management Job handling after printing
Clip and Tile Location of the tile (clipped location and tile size for a clipped image)
Spot Color Spot color plate generation or correction
Date/Time Date and time that the job was processed
Notes Text entered in the input field
MEMO You can use the preview in the layout area to check where the job properties will be printed.
Procedure
  1. Perform the operation shown below according to what is being set.
    • Job: Double-click the job to open the Job Settings window.
    • Queue folder: Click for the queue folder to open the Queue Properties window.
  2. Click .
  3. Select the Print Job Properties check box under Job Property Label.
    The model name and serial number of the printer that was used, as well as the job name, will be printed. As necessary, turn on any additional items to be printed.
  4. Click OK.
    • Any changes made in Job Settings will be applied.
    • When changes are made in Queue Properties:
      1. A message that printing settings will be overwritten appears. Click Yes.

      2. To apply the changes to a job already in the queue folder, select the job and click 1_2_2_4_clear_a. The changes are reflected in the layout area of the top window.

  5. Perform printing.
    The selected printing information is printed below the printed item.