Cleaning Liquid Pouch Replacement

WARNING
Never store ink, cleaning liquid, or discharged fluid in any of the following locations.
  • Any location exposed to open flame
  • Any location where high temperature may occur
  • Near bleach or any other such oxidizing agent or explosive material
  • Any location within the reach of children

Fire may be a danger. Accidental ingestion by children may pose a health hazard.

Procedure
  1. Remove the pouch tray from the cleaning liquid slot.

    VG3_CLPauchTrayOut_a

  2. Remove the cleaning liquid pouch from the pouch tray.

    VG640_USE_13-3

  3. Set the new cleaning liquid pouch in the pouch tray.
    1. Align the protrusion on the pouch (A) with the groove on the pouch tray (B).

      Install_InkpauchtoTray1

    2. Push the ink pouch until you hear a click as the hook on the pouch is locked.

      Install_InkpauchtoTray2
  4. Set the pouch tray in the cleaning liquid slot.
    Insert the pouch tray as far as it will go.

    VG3_CLPauchTrayIn

  5. Tap Yes when the cleaning liquid pouch replacement confirmation screen appears.
    If you tap Yes to reset the amount of cleaning liquid remaining, the cleaning liquid pouch will be identified as a new product.