Step 5: Reinstalling the Machine

Procedure
  1. Once the preparations are complete, move the machine with as little delay as possible.
  2. Reinstall the printer immediately, and then remove the retainer securing the print heads in place.

    VG3-Re-removeKoteigu

  3. Install the retainer at the position indicated in the figure for storage.

    VG3-Re-installKoteigu

  4. Turn on the main power switch.
    IMPORTANT

    To prevent the print heads from being damaged, move the machine with as little delay as possible and switch on the main power as soon as possible after moving the machine. To install the machine again, follow the procedure in the Setup Guide.

  5. Press the sub power button.
    The home screen appears, and then the machine is filled with cleaning liquid.
    MEMO

    If the initial setup or the ink filling is not complete, the language selection screen will appear. Follow the instructions on the screen to carry out the initial setup and ink filling.