Printing on Large Numbers of Objects

The procedure when printing consecutively any number of times on objects with the same material and shape is as follows.

Procedure
  1. Set the first object and ready the machine for printing.
  2. Create the print data, specify the number of copies to be printed, and output the data.
  3. When printing of the first copy is complete, open the front cover.
  4. Press the load/unload button.
    The object will be unloaded.
  5. Remove the object that was printed on and place a new object onto the support table.
  6. Press the load/unload button.
    The new object has been loaded.
  7. Close the front cover.
  8. Tap Resume.
    Printing of the second copy starts.
    To cancel printing, tap Cancel.
  9. Repeat steps 3 to 8.