Cleaning the Roller Surface of the Recoater

Wipe the roller surface with a soft cloth that is not fluffy. To avoid damaging the roller surface, do not use a dirty or stiff cloth. If dirt has stuck to the roller surface and cannot be removed, wipe off the surface with a slightly damp cloth. After removing all the dirt, remove moisture from the roller surface with a dry cloth.

Procedure
  1. Wipe the roller surface gently with a soft cloth.

    PB-600_cleaning_roller_0

    While rotating the roller a little bit at a time, wipe away the dirt from the entirety of the roller. The method for rotating the roller is shown below.

  2. Click DEBUG.

    move-table_1
  3. Click icon_ctrl_cursor.
    The Motor Control window appears.
  4. Click Roller to select it, and then click Min Pos to rotate the roller.
    To stop rotation, click Stop.

    PB-600_cleaning_roller_2