Removing Fixture Material from the Gutter (PB-400)

Under the pool, there is a gutter that is used to catch fixture material. Clean this gutter if it is filled with fixture material.

Procedure
  1. Open the cover in the middle section of the machine.

    PB-400_cleaning_gutter_0

    Also open the cover on the opposite side.

  2. Clean up the fixture material in the gutter with a vacuum cleaner.
    Use a vacuum cleaner with a long, thin nozzle to clean up the material. The horizontal gutter cannot be removed.

    PB-400_cleaning_gutter_1

    Clean up the fixture material on the opposite side in the same way.

  3. Open the maintenance cover.
  4. Pull the gutter out.

    PB-600_cleaning_gutter_4
  5. Clean up the fixture material in the gutter with a vacuum cleaner.
  6. After cleaning the gutter, return it to its original position.
  7. Close the maintenance cover.