Outputting Data

Import additive printing data prepared in advance, and then start printing with the 3D printer.

Procedure
  1. Prepare the print heads if you have not yet done so.

    Perform a binder discharge check.

    Binder Discharge Check

  2. Check the amount of liquid in each tank if you have not yet done so.

    If necessary, manage the amount of liquid in the binder tank and the disposal tank.

    Managing the Amount of Liquid in Each Tank

  3. Level the surface of the fixture material if you have not yet done so.

    Leveling the Surface of the Fixture Material

  4. Click icon_ctrl_open.

    The window for importing the file is displayed.

    Import the additive printing data file.

  5. Click icon_ctrl_print.

    A confirmation message appears. Click OK.

    Printing starts.

    Note that you can pause or stop printing, but if you restart printing, the job being printed cannot be used as a product.

  6. When printing finishes, clean the print heads.
    The cleaning method is the same as that used to clean the print heads before printing.

    Cleaning of the print heads