Cleaning of the print heads

If you detect nozzle drop-out with a test, clean the print heads.

Procedure
  1. Click icon_ctrl_head-cleaning.
    The PHMaintenance window is displayed.
    Dlg_printhead_cleaning
  2. Click Strong clean.
  3. Select all heads, and then click Start Cleaning.

    Print head cleaning starts.

    To check the results of the cleaning, perform the nozzle drop-out test again. If nozzle drop-out still occurs, perform cleaning again. Repeatedly perform the nozzle drop-out test and cleaning until nozzle drop-out does not occur.