Eliminating Spaces Around the Object to Be Printed On

When printing, make sure that there is no unnecessary space under the bottom of the print-head carriage (ink ejection surface of the print heads). If too much space is left open, ink mist can more easily form. Therefore, a jig to fill the space around the object to be printed on might be required depending on the size and shape of the object to be printed on. Prepare a jig if one of the following conditions is met.

  • An area around the print data size (left and right: direction the print-head carriage moves) plus a margin of 40 mm (1.57 in.) extends beyond the object to be printed on.
    fill_jigs_round_media

The height difference between the print surface and the jig surface should not exceed 2 mm (0.07 in.).