Jump to main content
User's Manual
User's Manual
  • Basic Handling Methods
  • Output Method
  • Optimizing Quality and Efficiency
  • Maintenance
  • Troubleshooting Methods
  • Appendix
INDEX
INDEX
  1. Home
  2. Maintenance
  3. Advanced Maintenance
  4. Handling Severe Dot Drop-out, Dot Displacement, and Uneven Colors
  5. Partially Restricting the Print Heads Used for Printing
  6. 2. Limit the print heads used for printing.
  • Basic Handling Methods
  • Output Method
  • Optimizing Quality and Efficiency
  • Maintenance
    • Introduction
    • Regular Maintenance
    • Disposing of Discharged Fluid
    • Advanced Maintenance
      • When Dot Drop-out or Dot Displacement Occurs
      • When Normal Cleaning Is Not Effective
      • When Uneven Color Issues Occur with White Ink
      • Handling Severe Dot Drop-out, Dot Displacement, and Uneven Colors
        • Ink Renewal Method
        • Partially Restricting the Print Heads Used for Printing
          • 1. Perform a printing test for the nozzle mask.
          • 2. Limit the print heads used for printing.
        • Emergency Measure) Cleaning the Print Head Surface
      • When the Operation Panel Is Dirty
    • Replacing Consumable Parts
  • Troubleshooting Methods
  • Appendix

2. Limit the print heads used for printing.

Use VersaWorks to select the nozzle group for printing. For detailed procedures, refer to the VersaWorks Master Guide.

https://downloadcenter.rolanddg.com/VersaWorks7
NozzleMask
RELATED LINKS
  • VersaWorks Master Guide
  • Basic Handling Methods
  • Output Method
  • Optimizing Quality and Efficiency
  • Maintenance
    • Introduction
    • Regular Maintenance
    • Disposing of Discharged Fluid
    • Advanced Maintenance
      • When Dot Drop-out or Dot Displacement Occurs
      • When Normal Cleaning Is Not Effective
      • When Uneven Color Issues Occur with White Ink
      • Handling Severe Dot Drop-out, Dot Displacement, and Uneven Colors
        • Ink Renewal Method
        • Partially Restricting the Print Heads Used for Printing
          • 1. Perform a printing test for the nozzle mask.
          • 2. Limit the print heads used for printing.
        • Emergency Measure) Cleaning the Print Head Surface
      • When the Operation Panel Is Dirty
    • Replacing Consumable Parts
  • Troubleshooting Methods
  • Appendix

Feedback

1 2 3 4 5
NO YES

Feedback

Thank you

FA04275/R1-250410

Copyright © 2025 Roland DG Corporation  
https://www.rolanddg.com/

User's Manual