1. Clean the print head caps.

Procedure
  1. Remove the object to be printed on.
  2. Tap VG3_Panel_Icon_CLEANING Cleaning.
  3. Tap Manual Cleaning.
  4. Tap Execute.

    When the confirmation screen appears, respond to the on-screen instructions, and then tap OK.

    The print head carriage moves to the left end of the machine.
  5. Follow the instructions on the operation panel to perform Manual Cleaning.
    • Tap VG3_Panel_Icon_LEFT_blue or VG3_Panel_Icon_RIGHT_blue to check the procedure.
    • If you complete the work without viewing the instructions, tap Finish All.
    IMPORTANT
    • Be sure to use one of the included cleaning sticks.
    • Do not use a previously used cleaning stick.
    • Do not put a previously used cleaning stick into the cleaning liquid.


    IMPORTANT

    Use a pair of tweezers to remove the pieces of hardened ink that are 3 mm (0.12 in.) or more in length.

    Do not use excessive force when pulling on pieces of hardened ink that are difficult to remove. Doing so may damage the print head caps.



    When you have finished cleaning, close the right cover.