Replacing the Wipers and Wiper Cleaner
The wipers and wiper cleaner are consumables that you use when cleaning the print heads. They need to be replaced at appropriate intervals.
CAUTION:
Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
IMPORTANT:
-
A warning beep sounds 10 minutes after operation starts. If the warning beep is heard, temporarily stop work, close the front cover, and press [ENTER]. Quit the wiper replacement menu. After that, restart the procedure from the beginning.
-
Be sure to hold the handle of the front cover and open and close it gently.
| Required items | |||
|---|---|---|---|
| Included items | Commercially available item | ||
 |
 |
 |
 |
| Wipers (2) | Wiper cleaner | Tweezers | Cloth |