2. Replace the wiper cleaner.

Procedure
  1. Remove the wiper cleaner case.
    Hold the right and left sides of the case with your hands and use slight force to pull it out.


    During the replacement, wipe away any buildup of ink around the outlet with a cloth.
  2. Replace the wiper cleaner.
    1. Remove the old wiper cleaner.


    2. Attach the new wiper cleaner.


  3. Attach the wiper cleaner case.
    Hold the right and left sides of the case and use slight force to push it in.


  4. Press [ENTER].
  5. Close the maintenance cover.
    Catch the maintenance cover pins on the notches, and then attach the maintenance cover.


  6. When the following screen is displayed, close the front cover.


    Start cleaning.
    When the following screen is displayed again, the wiper and wiper cleaner replacement is finished.