Step 2: Setting the IP Address of the Machine to Connect

Procedure
  1. Determine the IP address of the machine.

    Check the IP address of the computer to determine the IP address of the machine.

    When the IP address of the computer is 192.168.0.xxx

    • IP address of the machine: 192. 168. 0. yyy

      Enter any number from 1 to 254 for [yyy]. Ensure that they are different from the numbers of other network equipment.

  2. If the machine is off, press the power button to start the machine.
    GS2_Power_ONOFF
  3. Press MENU twice to display the screen shown below.
  4. Press ▼ once to display the screen shown below.
    MENU_SYSTEM-INFO
  5. Press ▶ once to display the screen shown below.
    MENU_SYSTEM-INFO_MODEL
  6. Press ▼ three times to display the screen shown below.
    MENU_SYSTEM-INFO_INTERFACE
  7. Press ▶ twice to display the screen shown below.
    MENU_NETWORK_DHCP_ON
  8. Press ▶, then ▼ to set DHCP to OFF.
    MENU_NETWORK_DHCP_OFF2
  9. Press ENTER.
  10. Press ▼ once to display the screen shown below.
    MENU_NETWORK_IP-ADDRESS
  11. Press ▶ twice.
    1. Press ▲ or ▼ to enter the IP address of the machine that you determined in step 1.

      Press ◀ or ▶ to move the cursor.

    2. Press ENTER.
  12. Press MENU to return to the original screen.
  13. Repeat steps 1 to 12 to set the IP address of the second machine.