Step 2: Checking the Settings of the Machine to Connect

Procedure
  1. If the machine is off, press the power button to start the machine.
    GS2_Power_ONOFF
  2. Press MENU twice to display the screen shown below.
  3. Press ▼ once to display the screen shown below.
    MENU_SYSTEM-INFO
  4. Press ▶ once to display the screen shown below.
    MENU_SYSTEM-INFO_MODEL
  5. Press ▼ three times to display the screen shown below.
    MENU_SYSTEM-INFO_INTERFACE
  6. Press ▶ twice to display the screen shown below.
    MENU_NETWORK_DHCP_ON

    If DHCP is set to OFF, press ▶, then ▼ to set DHCP to ON, and then press ENTER.

  7. Press ▼ once to display the screen shown below.
    MENU_NETWORK_IP-ADDRESS
  8. Press ▶ once.
  9. Make a note of the displayed IP address.
  10. Press MENU to return to the original screen.
  11. Repeat steps 1 to 10 to check the settings of the second machine.