Step 3: Configuring Adobe Illustrator Plug-in Output Settings

Procedure
  1. Start Adobe Illustrator.
  2. Click Window - Extensions - Roland CutStudio.
    Illustrator_Mac_Extention_RolandCutStudio

    The Roland CutStudio palette appears.

    Illustrator_Mac_RolandCutStudio
  3. Select GS2-24 from the Model list.
    Illustrator_Man_RolandCutStudio_Model2
  4. Click Icon_Illustrator_RolandCutStudio_Menu, and then select Connection.
    Illustrator_Man_RolandCutStudio_Connect
  5. Select [IP], and then enter the IP address that you made a note of in step 9 of Step 2: Checking the Settings of the Machine to Connect.

    Example:

    If the IP address of the machine is [192.168.000.061], enter [192.168.0.61].

    Illustrator_Mac_RolandCutStudio_Connect2
  6. Click Verify.

    If the connection with the machine is established successfully, Success! appears.

    Illustrator_Mac_RolandCutStudio_Connect3

    If Failed. appears, check whether the IP address has been entered correctly.

  7. Click OK.
  8. Repeat steps 4 to 7 to set the connection for the second machine.
    MEMO

    You can switch the output destination by selecting the IP address of the machine to output to with the Connection option in the Adobe Illustrator plug-in.