Step 2: Change the Computer's Printer Settings

If you change the USB number, the machine will be recognized as a different machine by the computer, and the printer driver will be added. Use the procedure in this section to link the name of an added driver to a USB number, making it easier to specify this driver name as the output destination.
Procedure
  1. Connect the machine to the computer using the USB cable.

    The driver is installed.

  2. Display the list of registered drivers.

    An example method for displaying the list of drivers is given below, but the operation method varies depending on your version of Windows. Use an appropriate method to display the list of drivers.

    • Open Control Panel.
    • Open [Devices and Printers].
    • Open [Printers & scanners].
  3. Change the name of the added driver.
    There is a duplicate of the GS2-24 driver in the list of drivers. The same as when a file is duplicated, "(1)" or "(1 copy)" is added to the end of the name of the duplicate driver. The name of the added driver is Roland DG GS2-24 (1), Roland DG GS2-24 (1 copy), or something similar, which allows you to identify the duplicate driver.
    1. Right-click the driver whose name you want to change, and then click Printer Properties.
    2. Change the name of the driver to Roland DG GS2-24 (B).
      It is a good idea to use a name that is associated with the USB number.
    3. Click OK.