Step 1: Change the USB Number of the Machine
IMPORTANT Do not connect the machine to the computer using the USB cable yet. Doing so may interfere with correctly applying the settings.
Procedure
- Turn off the power of the machine.
-
Press [TEST] and the power button at the same time.
The screen shown below appears.
-
Press [▲] and [▼] to select a setting other than "A".
It is possible to select a value from "B" to "E". In this example, "B" is selected.
- Press [ENTER].
-
Turn the power off and then on again.
The screen shown below appears. Check that the letter you set in step 3 is displayed.
