2. Enter the Distance between Tool Marks

Enter the distance, Width (W) and Length (L), which were noted when tool marks were created manually.

GS2_Cropmark-ManualCreattion3
Procedure
  1. Press [▶] three times to display the screen shown below.
    MENU_WIDTH_160_160
  2. Press [▲][▼] and enter the horizontal distance ("WIDTH") between the tool marks.
    MENU_WIDTH_160_180
  3. Press [ENTER] to select the setting.
    MENU_WIDTH_180
  4. Press [▼], then [▶] to display the screen shown below.
    MENU_LENGTH_210_210
  5. Press [▲][▼] and enter the vertical distance ("LENGTH") between the tool marks.
    MENU_LENGTH_210_230
  6. Press [ENTER] to select the setting.
    MENU_LENGTH_230