Installation and Initial Settings

Ethernet Connection (Automatically Set IP Address)

MEMO

When establishing a connection with a manually set IP address, this procedure is not necessary.

    1. Connecting the LAN Cable

  1. Start the computer.
  2. Press the power button to start the machine.
    power1
  3. Connect this machine and the computer with a LAN cable.
    mac_lan

    2. Checking the IP Address of the Machine

  1. If the machine is off, press the power button to start the machine.
    power1
  2. Press [MENU] twice to display the screen shown below.
    lcd_cut
  3. Press [▼] once to display the screen shown below.
    lcd_sysinfo
  4. Press [▶] once to display the screen shown below.
    lcd_infomodel
  5. Press [▼] three times to display the screen shown below.
    lcd_infointer
  6. Press [▶] twice to display the screen shown below.
    lcd_dhcp
  7. Press [▼] once to display the screen shown below.
    lcd_ip
  8. Press [▶] once.
  9. Make a note of the displayed IP address.
  10. Press [MENU] to return to the original screen.

    3. Configuring Adobe Illustrator Plug-in Output Settings

  1. Start Adobe Illustrator.
  2. From the [Window] menu, click [Extensions], and then click [Roland CutStudio].
    MAC_Plugin

    The [Roland CutStudio] palette appears.
    MAC_Plugin1
  3. Select [GS2-24] from the [Model] list.
    MAC_Plugin2
  4. Click MAC_Plugin3, and then select [Connection].
    MAC_Plugin4
  5. Select [IP], and then enter the IP address that you made a note of in step 9 of [2. Checking the IP Address of the Machine].
    6. Example:
    If the IP address of the machine is [192.168.000.061], enter [192.168.0.61].
    MAC_Plugin5
  6. Click [Check Connection].
    If the connection with the machine is established successfully, [Success!] appears.
    MAC_Plugin6

    If [Failed.] appears, check whether the IP address has been entered correctly.
  7. Click [OK].
  8. Close the [Roland CutStudio] palette, and then exit Adobe Illustrator.
    This completes the Ethernet connection.