Installation and Initial Settings

USB Connection

    1. Connecting the USB Cable

    Important

    When connecting the machine and the computer using a USB cable, follow the precautions below.

    • Use the included USB cable.
    • Never use a USB hub.
    • Do not use a USB extension cable.

  1. Start the computer.
  2. Press the power button to start the machine.
    power1
  3. Connect the machine to the computer using the USB cable.
    cable_connect_mac

    2. Configuring Adobe Illustrator Plug-in Output Settings

  1. Start Adobe Illustrator.
  2. From the [Window] menu, click [Extensions], and then click [Roland CutStudio].
    MAC_Plugin

    The [Roland CutStudio] palette appears.
    MAC_Plugin1
  3. Select [GS2-24] from the [Model] list.
    MAC_Plugin2
  4. Click MAC_Plugin3, and then select [Connection].
    MAC_Plugin4
  5. Select [USB], and then select [GS2-24] from the pull-down menu.
    USB1
  6. Click [Check Connection].
    If the connection with the machine is established successfully, [Success!] appears.
    MAC_USB2

    If [Failed.] appears, check whether the USB cable has been connected correctly.
  7. Click [OK].
  8. Close the [Roland CutStudio] palette, and then exit Adobe Illustrator.
    This completes the USB connection.