Cutting All at Once after Printing

Use the AAS plug-in to print material with several crop marks and then repeat the cutting process using a cutting machine for the number of printed materials. Doing so eliminates the need to output the cutting data each time by repeating the cutting process using only the first cutting data sent.

Procedure
  1. Print as many sheets with crop marks as necessary.
  2. Load the material and measure its size.
    Loading the Material
  3. Send cutting data to the printer and perform cutting.
    Adobe Illustrator 2. Perform cutting
    CorelDRAW 2. Perform cutting
  4. Remove the cut material.
  5. Load the next material and measure its size.
    Loading the Material
  6. Press [ON/OFF LINE] to switch to offline mode.
  7. Press [CUT TEST].
  8. Press [▶] several times to display the following screen.
    MENU_CUTTEST_AASjob
  9. Press [ENTER].
    The screen shown below appears. Cutting starts after the crop marks are read.

    MENU_AAS_Repeat_detecting

  10. Repeat steps 4 to 9 for the number of printed sheets.