2. Perform cutting

MEMO If the material comes loose or the machine operates unusually, press PAUSE/RESUME to cancel output. Then reload the material, starting over from the beginning.
Procedure
  1. If Adobe Illustrator is not running, start it.

    Open the target file if it is not currently opened.

  2. Click File - Print.

    The Print window appears.

  3. Configure the following settings.
    1. Click the printer pull-down menu (), and then select GR2-640 or GR2-540 as the output destination.
    2. Select the Ignore Artboards () check box.

      Leave this check box unselected if the object is fitted perfectly to the artboard.

    3. Select the lower-left corner for Placement ().
    Set_AI-print
  4. Click Printer.

    If a message appears, click Continue.

    The Print window appears.

  5. Click Preferences.

    The Printing Preferences window appears.

  6. Click the Cutter tab.
  7. Edit the cutting conditions ().

    Set other items () as necessary.

    Click Load to load cutting condition presets.

    Set_cut-param
  8. Click the Paper tab.
  9. Click Get from Machine.
    dlg_drv_paper-size

    The size (cutting area) of the material loaded in the cutting machine will be imported into Paper Size.

  10. Click OK.

    The Printing Preferences window closes.

  11. Click Print.

    The Print window closes.

  12. Click Done.
  13. Click File - Print.

    The Print window appears again.

    Using the preview window, check that the cutting data is displayed at the bottom left.

    dlg_ai-print_preview_jp
  14. Click Print.

    The data is output and cutting starts.