Set the gateway address.

The gateway address is required in order to transfer data between devices with different subnet masks. There is no need to set the gateway address if the devices have the same subnet mask. Set the gateway address if you have been asked to do so by your network administrator.
Procedure
  1. Press [▼] to display the screen shown below.
    MENU_NETWORK_GATEWAY
  2. Press [▶] twice to display the screen shown below.
    MENU_GATEWAY_000000000000
  3. Press [▲] or [▼] to select the address number.
  4. Press [▶].
  5. Repeat steps 3 and 4 to set "GATEWAY ADDR." to "192.168.0.1."
    For the gateway address setting, consult your network administrator. Here, [192.168.0.1] is entered by way of example.
    MENU_GATEWAY_192168000001
  6. When you finish making the setting, press [ENTER].
  7. Press [MENU] to return to the original screen.