Set the subnet mask.

Procedure
  1. Press [▼] to display the screen shown below.
    MENU_NETWORK_SUBNET
  2. Press [▶] twice to display the screen shown below.
    MENU_SUBNET_000000000000
  3. Press [▲] or [▼] to select the address number.
  4. Press [▶].
  5. Repeat steps 3 and 4 to set "SUBNET MASK".
    Enter the subnet mask specified by your network administrator. Here, "255.255.255.0" is entered by way of example.
    MENU_SUBNET_255255255000
  6. When you finish making the setting, press [ENTER].
  7. Press [◀] to go back to the screen shown below.
    MENU_NETWORK_SUBNET

    If the subnet mask of this machine differs from that of the computer that will output the print data, you will have to set the gateway address. Proceed to the next step.