Saving the Current Settings in Presets

Using the "PRESET" menu lets you easily change a wide variety of settings to optimize them for the media.

Up to 20 types of presets can be saved. You can assign a name to each one. Using media names for these may aid recognition and clarity. Making changes for each menu item every time you change the media can be troublesome. That's why it can be useful to save the menu-item settings optimized for an often-used type of media as a preset. The next time you use the media, you can change the menu-item settings to the optimal values for the media simply by loading the preset you saved.

Procedure
  1. Press [MENU].
  2. Press [▼] to display the following screen.


  3. Press [▶] once, and then press [▼] twice to display the screen shown below.


  4. Press [▶] to display the following screen.


  5. Decide on the preset number.
    1. Press [▲] or [▼] to select one option from "NAME1" to "NAME20".
    2. Press [ENTER] to confirm your entry.
      The current menu settings are saved, and then the screen shown below appears.


  6. Set the preset name.
    1. Press [▲] or [▼] to select a character.
    2. When you have selected the character you want to enter, press [▶].
      The characters you can enter are "A" through "Z," "0" through "9," and the "-" character.
    3. Press [▲] or [▼] to select the next character.
      Select the following characters in the same way. You can enter up to 15 characters, including spaces.


    4. When you have finished, press [ENTER] to confirm your entry.
  7. Press [MENU] to return to the original screen.
    The menu items that can be saved in presets are listed below.
    Menu itemReference page
    "HEATER CONFIG "Setting the Dryer Temperature
    "MEDIA GAP ADJ."Adjusting Ink Landing Misalignment (ER-642)
    "CALIBRATION"Reducing Horizontal Bands (Feed Correction Function)
    "FEED FOR DRY"Drying the Trailing Edge of the Printing Area on the Dryer
    "SHEET TYPE" 1. Set the media type to "CLEAR".
    "SHEETWIDTH" 2. Set the media width.
    "SHEET POS." 3. Load transparent media or media with high reflectance in the machine.
    "SIDE MARGIN" Other Useful Functions
    "SCAN INTERVAL" Using Hard-to-Dry Media
    "VACUUM POWER"Using Media That Wrinkles Easily/Does Not Move Smoothly
    "FULL WIDTH S"Speeding Up Output for Narrow Media
    "DRYING TIME"Setting the Drying Time after Printing
    "MEDIA RELEASE"Using Sticky Media