Step 6: Removing the Retainers

IMPORTANT
  • Make sure to remove all the retainers. Any that remain may cause faulty operation or breakdown when the power is switched on.
  • Store the retainers because they are needed again when transporting the machine.
Procedure
  1. Open the front, left, and right covers.
  2. Remove all the retainers.

    ER-642_Retainers-Front

  3. Install retainers C and D, which you have removed, at the positions indicated in the figure for storage.
    Use the bolt removed in step 2.

    Retainer C


    ER-642_C-Retainer_fixing

    Retainer D

    Rotate retainer D by 180° and install it at the position that hides the gear.


    ER-642_D-Retainer_fixing

  4. Close the front, left, and right covers.