Care and Storage of Detection Pin and Automatic Correction Jig

For automatic correction, use the detection pin and the automatic correction jig. The presence of rust, scratches, or grime on the detection pin or the automatic correction jig makes accurate correction impossible, which in turn may affect the milling results or damage the machine.
Procedure
  1. Use the included cloth for care to carefully wipe off the entirety of the detection pin and the automatic correction jig.
    Check that the parts are free of rust, scratches, and grime.
  2. Press the bottom storage cover at the bottom of the machine to open this cover.
  3. Store the automatic correction jig and detection pin.

    Set the automatic correction jig in the adapter rack, and store the detection pin in the bottom storage.

    DWX-53DC_AjusterJIG_PIN_Cleaning