4. Check the coolant flow rate

Procedure
  1. Close the front cover.

    Hold the parts shown in the figure with both hands and close the cover.

    DWX-43W_main_09
  2. Click Next.

    Coolant is discharged and contacts the dummy pin.

    VPanel_DWX-43W_ColletMaintenance_03
  3. Visually check that coolant is applied to the middle of the dummy pin.
    • If coolant is applied to the middle of the dummy pin

      1. Select The coolant is hitting the middle part of the dummy pin., and then click Next.
      2. Click Complete.

        This completes the procedure for checking the coolant flow rate.

        VPanel_DWX-43W_ColletMaintenance_04
    • If coolant is not applied to the middle of the dummy pin

      1. Click Next without selecting The coolant is hitting the middle part of the dummy pin..
      2. Check the following items, and then click Close.

        There must be a sufficient amount of coolant.
        Filling the Coolant Tank
        Coolant nozzles must not be clogged.
        Cleaning the Coolant Nozzle
        The tank filter must not be clogged.
        Replacing the Coolant
      3. Check the coolant flow rate again.

        Follow the procedure below to check the coolant flow rate.