1. Remove the collet.

Procedure
  1. Show VPanel.
  2. Click Icon_VPanel_for_DWX_Collet_maintenance.
    VPanel_DWX-43W_ColletMaintenance_01
  3. Open the front cover.

    Hold the parts shown in the figure with both hands and open the cover.

    DWX-43W_main_10
  4. Remove the workpiece, rotary axis correction jig, and ATC magazine correction jig.
  5. Click Next.
    VPanel_DWX-43W_ColletMaintenance_02
  6. Press the collet replacement jig () against the collet, and then insert the collet tap ().

    Align the hexagonal tip of the collet and the hexagonal portion of the collet replacement jig.

    DWX-43W_replace_collet_01
  7. While gently pressing the collet tap up into the hole, rotate the collet replacement jig in the direction indicated in the figure.

    Rotate the collet replacement jig until the collet naturally comes free.

    CAUTION

    Rotate the collet replacement jig with the collet tap inserted.

    If the collet replacement jig is rotated without the collet tap inserted, the collet may be damaged.

    DWX-43W_replace_collet_02