Step 2: Installing the Drying-heater Unit

Procedure
  1. Follow the procedure below to install the drying-heater unit.
    1. Hold this unit with two workers.
    2. Place it on the hooks (A) on the left and right arms.
    3. Press it into the arms by pushing the top side.
    IMPORTANT Do not catch the drying-heater unit cable between the arm and the drying-heater unit.

    DU3-InstallAddHeater1

  2. Align the screw holes on the drying-heater unit with the holes on the arms, and then temporarily tighten the four large bolts.
    After temporarily tightening the bolts, make sure the left arm is parallel with the left edge of the drying-heater unit.
    IMPORTANT When aligning the bolts with their holes, move the drying-heater unit while supporting it so it does not fall down.
  3. Fully tighten the large bolts in the order of , .

    DU3-InstallAddHeater2