Setting the Oven's Internal Temperature When Printing Starts

When the print data is received from the computer, if the oven's internal temperature is lower than the set temperature, the internal temperature is increased. Printing starts when the set temperature is reached. If you are using media that does not foam unless the internal temperature exceeds the predetermined temperature, set an internal temperature that meets this condition.

However, if it is determined that the internal temperature will not reach the set temperature due to insufficient heat source power, this setting is ignored. The reason is to prevent the situation in which printing is not possible due to the inability to increase the internal temperature to the set temperature. If the media does not foam, review the temperature setting of the oven heater.