Types and Timing of Maintenance

To use this machine under its optimal conditions, it is important to perform the appropriate maintenance at the appropriate times.

Regular Maintenance

These are the maintenance items that are required on a daily basis.

TimingItemCorresponding page
Before daily operationsMixing the white inkMaintenance of Ink Cartridges (White Ink Only)
Start-up cleaningStart-up Cleaning
Print head checkPrint Head Check before Printing
After daily operationsCleaning the machineCleaning the Machine
Daily shut down cleaningDaily Shut-down Cleaning
If the discharged fluid disposal message appearsDisposing of discharged fluidDisposing of Discharged Fluid

Advanced Maintenance

Maintenance that is performed in an emergency. Some of this maintenance consumes a large amount of ink, so thoroughly read the explanation, and then perform the operation at the appropriate point in time.

TimingItemCorresponding page
If colors are unevenInk mixing, ink circulation (white ink only), and ink replacementDid You Shake the Ink Cartridges before Installing Them?
When dot drop-out or dot displacement occursChecking and cleaning the print headsStep 1: Performing a Nozzle Drop-out Test
Step 2: Normal Cleaning Method
Medium Cleaning
Powerful Cleaning
Start-up Cleaning
When severe dot drop-out occursChecking and cleaning the print headsHandling Severe Dot Drop-out

Replacing Consumable Parts

These items are for replacement of consumable parts. Thoroughly read the explanation, and then perform the operation at the appropriate point in time.

TimingItemCorresponding page
When a message appearsReplacing the wiper Replacing the Wiper
Replacing the felt wiperReplacing the Felt Wiper
Replacing the wiper padReplacing the Wiper Pad
Replacing the cap topReplacing the Cap Top
When a cutting edge becomes dullReplacing the bladeReplacing the Blade
Replacing the Separating KnifeReplacing the Separating Knife