Preferences

Media Edge Detection

Sets whether to detect the leading and trailing edges of the media. When using transparent media, whose edges cannot be detected, clearing this check box makes it possible to set up the media without detecting the edges.

Media clamp position

This menu is used to change the right media clamp position when loading media on the machine. This item cannot be used when media has been set up.

Click Execute to move the print-head carriage to the left, allowing you to adjust the right media clamp position.

For more information, refer to Adjusting the Right Media Clamp Position.

Remaining Media Management

When you set the amount of remaining media that has been set up, this amount is displayed on the Utility home screen.

Click Execute next to Execute Printing Remaining Media Amount to print the amount of remaining media.

Skewing Correction Support at Setup

Selecting this check box provides support, preventing skewed installation of the media by making a sound and operating an automatic suction fan during setup.

Nozzle Drop-out Test Printing Position

Sets the direction for test pattern printing: Vertical Printing or Horizontal Printing.

Cleaning during Printing

Selects the frequency of cleaning during printing from the following options.

• No Cleaning
  • Automatic cleaning during printing is not performed.
• Every Page
  • Automatic cleaning is performed each time prior to the start of printing.
• Periodically (Job Priority)
  • Automatic cleaning is performed prior to the start of the next printing operation, and cleaning during printing is not performed.
• Periodically (Time Priority)
  • Automatic cleaning is performed when the cumulative printing time reaches the value you set here.

If you select Periodically (Job Priority) or Periodically (Time Priority), set the interval from the previous cleaning operation to the next cleaning operation.

Standby Heater Temperature

Sets the heater temperature when media has not been set up.

You can change the setting from the pull-down menu.

Prefeeding at Output

If you select this check box, the media will be prefed when it is fed out, such as during cutting, preventing the pulling of the media with undue force.

Priority for Cutting Settings

Sets whether to prioritize the cutting settings of the machine or the software.

Ink circulation interval

Sets the frequency of white ink circulation to prevent uneven color issues.

Sleep Time

Sets the time until sleep mode (the state in which the power-saving features operate) activates.

Date and Time

Changes the date and time printed on printing tests such as nozzle drop-out tests and print & cut position adjustment.

Initialize Settings

Click Execute next to Return the Settings to Their Factory Default Values to return all settings other than Units to their factory default values.