Four Different Output Methods
The following four output methods are available for this machine.
| Printing (Only) | Printing using ink. It is also called "Printing Only" to distinguish from "Printing and Cutting." |
| Cutting (Only) | Cutting using a blade such as for seal die cutting. It is also called "Cutting Only" to distinguish from "Printing and Cutting." |
| Printing and Cutting | Printing method in which printing is followed by cutting. If output data that contains both printing and cutting information is sent to the printer, the cutting operation starts after printing finishes. |
| Cutting with Crop Marks | Output method using "Crop Marks" to align the printing and cutting results. If you are printing on the media, removing it so it can be laminated, and then setting up the media again to cut it, use the crop marks to align the media. |
You can also use sheet cutting to print on media and then separate it. The media is fed and pulled back to separate it at the desired location. You can also specify perforation.
Important Points During Use
Use the machine periodically
We recommend using the machine at least once a week. If left unused for a long period of time, the ink may settle, resulting in unstable discharge (and nozzle clogging). Any dry ink will need to be discharged.