Adjusting printing and cutting

When printing and cutting at the same time, adjust and align the printing and cutting positions. Depending on the media thickness, sometimes printing and cutting positions are very slightly out of alignment. It is recommended to set correction values to suit the media.
Procedure
  1. Load the media to be cut.
    Step 1: Loading Media
  2. Open the Utility window.
    How to Open the Utility Window / Exit the Utility
  3. Click Print and Cut Adjustment.
    BN-20A_UtilityPreCut
  4. Click Print and Cut Pattern.
    The test pattern is printed.
    BN-20A_UtilityPreCut_01
  5. Follow the on-screen instructions and enter the values for New Scanning Value and New Feeding Value.
  6. Click Apply.
    The values in New Scanning Value and New Feeding Value change to "0."
  7. Click Close.