Normal Cleaning
Procedure
- Set up the nozzle drop-out test paper.
-
Click
Cleaning on the Utility home screen.
-
Select Normal Cleaning under Head Cleaning, and then click Execute.
Cleaning in progress. and an estimate for the remaining cleaning time are displayed on the Utility home screen.
-
Click Output under Nozzle Drop-out Test.
Printing of the test pattern starts.
- When printing is complete, open the front cover.
-
Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
MEMO- If the problem persists, try performing normal cleaning again.
- If problems such as dot drop-out and dot displacement persist even after you have performed normal cleaning several times, use a different cleaning method.
-
Close the front cover.
If no dot drop-out or dot displacement occurs, preparations for output are finished.
- Click Close to return to the original screen.