Step 5: Perform Printing

MEMO Depending on the computer display settings, the Send to Device or Print parameters window may not fit on the monitor. If this occurs, adjust the magnification and layout in the display settings.
Procedure
  1. Open the saved print data.
  2. Click VSD_icon_PRINT.
    The Send to Device dialog box appears.
  3. Check the following.
    • Device: BD-8
    • Number of prints: 1
    • Output: Page
  4. Click Print parameters and set the printing details.
    Set Media Type and Mode on the Quality tab. Set as appropriate depending on whether Pr or Wh is used and on the print data.
  5. Click Send.
    Printing starts.
  6. Once printing is complete, remove the object, and exit out of setup in Utility.