Menu List

Tap Panel_Icon_Menu to display the following list of operations to perform from the screen.

MEMO Media Settings only appears when media is loaded. When Menu operation in progress: Press [Home] to enable output. is displayed in the status bar, the display will automatically return to the home screen after 5 minutes.
Level 1 Level 2 Level 3 Level 4 Details
Job Management Direct Printing

Specify the VersaWorks and queue folders via Roland DG Connect Hub, and output the job.
Printing Log Displays the job Printing Log.

The Job Properties for each job, and the Total Time and Total Area for all jobs, can be checked.
Media Settings*1 List of Media Settings Lists the settings of the media that has been set up. Tap a setting to switch to a screen for changing this setting.
Printing Settings Print Head Height Checks/changes the head height.
Batch Automatic Correction Adjustments are performed in the following order: Multi Sensor Adjustment, Media Gap Adjustment, then Feed Correction.
Feed Correction Simple Correction (Auto) Adjusts the media feed amount during printing. With Simple Correction (Auto), a test pattern is printed and then read with a sensor to automatically set the correction value.
Detailed Correction (Manual) Adjusts the media feed amount during printing. With Detailed Correction (Manual), a test pattern is printed, and then the correction value is entered manually after the printed correction value is checked visually.
Media Gap Adjustment Simple Correction (Auto) Corrects the ink landing position. With Simple Correction (Auto), a test pattern is printed and then read with a sensor to automatically set the correction value.
Detailed Correction (Manual) Corrects the ink landing position. With Detailed Correction (Manual), a test pattern is printed, and then the correction value is entered manually after the printed correction value is checked visually.
Cutting Settings Blade Adjustment Sets cutting conditions such as Blade Force and Cutting Speed.
Print & Cut Position Adjustment Corrects misalignment in the printing position and the cutting position during printing and cutting.
Crop Cut Position Adjustment Corrects misalignment in the crop mark positions and the cutting position when cutting with crop marks.
Cutting Distance Correction Corrects misalignment in the cutting line length due to changes in the media movement distance.
Over Cut Cutting the corners of the border of the cutting line slightly longer makes it possible to cut the corners attractively.
Media Settings*1 Heater Settings Heater Temperature Print Heater Switches the print heater on/off and changes the set temperature.
Dryer Changes the set temperature of the dryer.
Pullback After Printing Enables/disables the function that pulls back onto the platen the media dried with the dryer after printing.
Other Media Settings Multi Sensor Adjustment Optimizes the status of the multi sensor used with the automatic correction function.
Drying Time Per Scan Sets the drying time per scan operation of the print-head carriage.
Media Suction Force Adjusts the media suction force of the platen.
Media Sticking Prevention When set to Enable, the media is peeled off before printing.
Middle Pinch Auto Raise/Lower Causes the middle pinch rollers to go up automatically during pullback printing or printing and cutting.
Batch Media Settings The minimum settings required for media setup can be configured by following the on-screen instructions on the operation panel.
Media Management Displays a list of registered media. Up to 50 media names can be saved, and the following operations on media settings are possible.
  • Checking setting details in a list
  • Changing media names
  • Copying media settings
  • Duplicate as Media for Cutting
  • Deleting media settings
Cleaning Printing Test

Before printing, use Nozzle Drop-out Test to check whether ink is discharged from the print heads correctly. If nozzle drop-out (dot drop-out) is present, perform cleaning appropriate for the severity of the drop-out. If faulty ink discharge cannot be improved, the problematic nozzle can be identified with Nozzle Mask Test, making it possible to stop using this nozzle.

You can configure the Printing Test to dry the media with the dryer after the printing test or to not do so.
Normal Cleaning

If dot drop-out or dot displacement occurs, select the nozzle and then perform cleaning of the print heads. If the problem cannot be fixed, perform more powerful cleaning.

If the media has already been set up, the After cleaning, perform a printing test. menu appears. When this is turned on, a printing test is performed after cleaning.
Medium Cleaning
Powerful Cleaning
Manual Cleaning Use cleaning liquid and a cleaning stick to clean the area around the print heads.
Maintenance Wiper Replacement Replace the wipers.
Blade Replacement Replaces the blade used in cutting.
Separating Knife Replacement Replaces the separating knife used in media separation.
Flushing Sponge Replacement To maintain print quality, replace the flushing sponges that absorb the ink discharged from the heads.
Ink Renewal Perform this operation when ink discharge issues or uneven colors are not resolved even after Normal Cleaning, Medium Cleaning, Powerful Cleaning, and Manual Cleaning. However, this operation consumes a large amount of ink and may damage the print heads, so do not perform it more than necessary.
Ink Circulation*2 Circulates ink to prevent uneven color issues with white ink.
Light Choke Cleaning Use this operation to stabilize output when uneven color issues are not resolved even after shaking the ink cartridge to mix the ink or performing Ink Circulation. However, this operation consumes a large amount of ink and may damage the print heads, so do not perform it more than necessary.
Drain Bottle Use this menu to discard discharged fluid at any desired time, regardless of any notifications or errors.
Automatic Maintenance Set the maintenance items that are performed automatically and the Type and Frequency according to the printer service environment, types of products that are frequently output, and other factors. A maximum of five settings for automatic maintenance can be saved.
Automatic Sub Power On Settings

This can be set so that the printer sub power is automatically turned on for each day of the week. Set the time at wihich to switch on sub power automatically, and you can also specify days when the sub power will not automatically be turned on.
Preferences Media Edge Detection Sets whether to detect the leading and trailing edges of the media. When using transparent media, whose edges cannot be detected, the media can be set up without detecting the edges by selecting Disable.
Print Light Select On, Off, or Auto for the print light. Select Auto to automatically turn the light on/off according to the status of the printer.
Take-up Sets the Take-up during Cutting, Take-up Method, and Take-up Direction for the take-up unit.
Remaining Media Management Sets the amount of remaining media that has been set up and displays this amount. This amount can also be printed on the media.
Skewing Correction Support at Setup Provides support, preventing skewed installation of the media by making a sound and operating an automatic suction fan during setup.
Printing Test Position Sets the direction for test pattern printing: Feed or Scan.
Perforated Sheet Cutting Sets the perforated sheet cutting conditions.
Standby Heater Temperature Print Heater Sets the print heater temperature when media has not been set up.
Dryer Sets the dryer temperature when media has not been set up.
Prefeeding at Output Prefeeds the media when it is fed out, such as during cutting, preventing the pulling of the media with undue force.
Priority for Cutting Settings Sets whether to prioritize the cutting settings of the machine or the software RIP.
Ink Circulation Interval Sets the frequency of white ink circulation.
Notifications On/Off When Enable is selected, notifications are displayed at the appropriate times.
  • Ink Mixing Notification
  • Middle Pinch Roller Placement Notification
  • Media Clamp Placement Notification
Sound at End of Printing Selects whether to play a sound at the end of printing.
Sleep Time Sets the time until sleep mode (the state in which the power-saving features operate) activates.
Stopping the Warning Beep Sets the duration of the warning beep that sounds when, for example, an error occurs.
Reset to Factory Defaults Returns all settings other than Language and Units to their factory default values.
System Information Machine Information Displays the Model, Serial Number, Ink Type, Firmware Version, and MAC Address.
Network Sets the Obtain IP Address Automatically, IP Address, Subnet Mask, and Default Gateway to connect the machine to a computer.
Units Sets the Length and Temperature.
Language Sets the language. Languages that can be set are Japanese, English, French, Italian, German, European Spanish, South American Spanish, South American Portuguese, and Simplified Chinese.
Date/Time Sets the current year, month, day, hour, minute, and second.
Appearance Selects the color scheme of the operation panel's screen.
Screen Brightness Sets the brightness of the operation panel's screen.
Screen Operation Sound Turns the operation sound of the operation panel on/off.
2D Codes User's Manual Displays the 2D code for viewing the manual using a smartphone or other mobile terminal.
Roland DG Connect Displays the 2D code for accessing Roland DG Connect using a smartphone or other mobile terminal.
License Displays the license information of the operation panel.
*1 This only appears when media has been set up.
*2 This only appears when the machine ink type includes white ink.