5. Install the dancer roller.

Procedure
  1. Raise the dancer roller and place it on the stand legs.
    MEMO The dancer roller has no particular front and rear orientation.

    ER-642_Attach_Dance-Roller1

  2. On the right side of the dancer roller, bring the flat surface of the shaft (A) toward you, and then temporarily tighten the bolt.

    ER-642_Attach_Dance-Roller2

  3. On the left side of the dancer roller, temporarily tighten the bolt.
    MEMO Both sides of the shaft are flat on the left side of the dancer roller.

    ER-642_Attach_Dance-Roller3

  4. Fully tighten the bolt on the right side (A), followed by the left side (B) of the dancer roller.

    ER-642_Attach_Dance-Roller4