2. Performing a Cutting Test

Procedure
  1. Set up the media for which operations before cutting output, such as lamination, is complete.
    Begin setting from Step 1: Configuring Batch Media Settings again.
  2. Tap Panel_Icon_Toggle_OFF next to Separate Test for Printing/Cutting with Crop Marks to turn it on .
  3. Tap Execute next to Cutting Test.
    The Move the blade over a crop mark. window appears.
  4. Tap Panel_Icon_UpArrow, Panel_Icon_DownArrow, Panel_Icon_LeftArrow, or Panel_Icon_RightArrow to move the center of the blade over the crop marks to use in the cutting test.
    The center of the blade should only be over the crop marks, and does not need to be aligned with the center of the crop marks.

    VG3-ClopMarkSet
  5. Tap Execute.
    The cutting test starts.