Step 7: Adjusting the Output-start Location

Set the base point to determine the printing area on the set up media.

The base point () indicates the right edge of the printing area (). (: Media feed direction, : print-head carriage movement direction) You can print without setting the base point, but setting the printing area enables you to use media without being wasteful and also to print on the targeted location.

Make this setting for each individual page. When the printing of one page finishes, the base point returns to its default value.



MEMO

  • Note that the left and right positions are not restored to their defaults for test patterns.

Procedure
  1. Tap Output Start Location - Change.
    The movement screen appears.
  2. Tap Panel_Icon_LeftArrow.
    The cutting carriage moves to the current base point.
  3. Tap Panel_Icon_UpArrow, Panel_Icon_DownArrow, Panel_Icon_LeftArrow or Panel_Icon_RightArrow to move the center of the blade to the position that you want to set as the base point.
    Tap Panel_Icon_UpArrow or Panel_Icon_DownArrow to move the media. Tap Panel_Icon_LeftArrow or Panel_Icon_RightArrow to move the cutting carriage.

    AP-640_SetBasepoint_Edge
    • : Printing area
    • : Base point (right edge of the printing area)
  4. Once the position has been decided, tap Set Base Point Here to confirm it.